Why use asbestos tile defoamer?

　　Today, Xiaobian popularizes some application knowledge about asbestos tile defoamer. Because there is no introduction about asbestos tile defoamer on the Internet, Xiaobian only briefly talks about it here. If you know more than Xiaobian, you are welcome to add.

　　To know the use method of asbestos tile defoamer, you must know what asbestos tile is and what it is used for. First look at the raw materials of asbestos tiles: its main raw materials are asbestos fiber and cement. Secondly, in the production process, it is made through plate making and pressing. Finally, the specifications are usually divided into three types: large wave, medium wave and wavelet. Of course, herringbone back tiles are also used to cover the roof. Asbestos shingles are widely used as roof waterproofing materials because of their advantages of single piece, large effective utilization area, fire prevention, moisture resistance, corrosion resistance, heat resistance, cold resistance, light weight and so on.

　　After knowing the relevant introduction of asbestos tile, we will get to the point, that is, why do we use asbestos tile defoamer? That is because asbestos shingles contain a lot of asbestos and glass fiber during production. These two substances will produce a lot of foam in the process of high-speed mixing, which will affect the progress of production and processing and seriously affect the quality of finished asbestos shingles. Therefore, asbestos tile defoaming agent needs to be added in the production process to eliminate foam and inhibit the generation of foam.

　　The asbestos tile defoamer can be directly added to the foaming liquid. Its superior dispersion makes it dissolve well and will not cause corrosion to the product. However, the specific dose cannot be given here. If you want to know how to add and how much to add, you can call the factory technicians who make asbestos tile defoamer and ask them to give you an accurate answer.